LIGNE HF MAIN SLX SM58 SHURE

Caractéristiques du récepteur

 Dimensions

42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)

Weight

816 g (1 lb. 13 oz.)

Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)

XLR connector (into 600 Ω load): –13 dBV

1/4 inch connector (into 3000 Ω load): –2 dBV

Output Impedance

XLR connector: 200 Ω

1/4 inch connector: 1kΩ

XLR output

Impedance balanced

Pin 1: Ground

Pin 2: (+)

Pin 3: (-)

Sensitivity

–105 dBm for 12 dB SINAD, typical

Image Rejection

>70 dB, typical

Power Requirements

12–18 Vdc at 150 mA, supplied by external power supply

Operating Range Under Typical Conditions

100m (300 ft.)

Note: Actual range depends on RF signal absorption, reflection, and

interference

Audio Frequency Response (+/– 2 dB)

Minimum: 45 Hz

Maximum: 15 kHz

Note: Overall system frequency depends on microphone element.

Total Harmonic Distortion (ref. +/– 38 kHz deviation, 1 kHz tone)

0.5%, typical

Dynamic Range

>100 dB A-weighted

Operating Temperature Range

–18°C (0°F) to +50°C (+122°F)

Note: battery characteristics may limit this range

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied

to tip of WA302 phone plug) produces positive voltage on pin 2 (with

respect to pin 3 of low impedance output) and the tip of the high

impedance 1/4-inch output.

Logic Connections (SLX4L only)

Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA.

Absolute maximum -0.7 to 5.5V DC

Pin 2: Logic ground

Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA.

Absolute maximum -0.7 to 5.5V DC

Caractéristiques du micro émetteur

Audio Input Level

+2 dBV maximum at -10dB position

-8 dBV maximum at 0dB position

Gain Adjustment Range

10dB

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions (including SM58 cartridge)

254 mm x 51 mm dia. (10 x 2 in.)

Weight

290 grams (10.2 oz.) without batteries

Housing

Molded PC/ABS handle and battery cup

Infos :

Fonctionne avec 2 piles LR6, vendues séparément.

Prévoir 2 piles par tranche de 3 à 4 heures.

Il est prudent d’avoir 2 piles en secours.