SWITCH EXTRON MLS306 3E VGA / 1S
  • SWITCH EXTRON MLS306 3E VGA / 1S

SWITCH EXTRON MLS306 3E VGA / 1S

60,00 € HT
par jour

Vous souhaitez une information ?
Vous désirez un devis, une réservation ?
Appelez-nous au 01 42 08 78 08
contact@prestacomaudiovisuel.com

Le tarif indiqué correspond à un jour de location
Pour une durée plus longue, appliquez le coefficient suivant :

week-end
coef 1
2 jours
coef 1,5
3 jours
coef 2
4 jours
coef 2,5
1 semaine
coef 3
2 semaine
coef 4
3 semaine
coef 4,5
4 semaine
coef 5
Video
Gain 
Unity
Bandwidth
     MLS 306 
280 MHz (-3dB), fully loaded
     All other models 
350 MHz (-3dB), fully loaded
Frequency response 
< ± 0.1dB @ 30 MHz
Differential phase error 
1.5º,  0 to 10 MHz
Differential gain error 
1.5%,  0 to 10 MHz
Crosstalk 
-50dB @ 5 MHz
Video input
Number/signal type
     MLS 306 
3 RGBHV, RGBS, RGsB, or RsGsBs
      
3: S-video, composite video
     MLS 506 Series 
3 RGBHV, RGBS, RGsB, or RsGsBs
      
3: component video, S-video, or composite video
Connectors
     MLS 306 
3 female 15-pin HD (RGB computer video)
      
3 female 4-pin mini-DIN (S-video)
       
3 female BNC (composite video)
     MLS 506 Series 
Female BNCs
Minimum/maximum levels 
Analog: 0.0V to 2.0V p-p with no offset
Impedance 
75 ohms
Horizontal frequency 
15 kHz to 150 kHz
Vertical frequency 
30 Hz to 150 Hz
Return loss 
-45dB @ 5 MHz
Maximum DC offset 
1.5V
Video output
Number/signal type
     MLS 306 
2 RGBHV, RGBS, RGsB, or RsGsBs
      
1 S-video
       
1 composite video
     MLS 506 Series 
1 RGBHV, RGBS, RGsB, or RsGsBs
      
1 component video
       
1 S-video
       
1 composite video
Connectors
     MLS 306 
1 female 15-pin HD (RGB computer video output 1)
      
5 female BNC (RGB output 2)
      
2 female BNC (S-video)
       
1 female BNC (composite video)
     MLS 506 Series 
Female BNCs
Minimum/maximum levels 
Analog: 0.0V to 2.0V p-p with no offset
Impedance 
75 ohms
Return loss 
-45dB @ 5 MHz
DC offset 
± 5mV maximum
Switching type 
Triple-Action for RGB
Sync
Input/output type 
RGBHV, RGBS, RGsB, RsGsBs
Standards 
NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level 
2V to 5V p-p
Output level 
TTL: 5.0V p-p
Input impedance 
>1 kohms
Output impedance 
75 ohms
Max input voltage 
5V p-p
Max propagation delay… 
30 ns
Polarity 
Positive or negative: (follows input)
Audio
Frequency response
     MLS 306, MLS 506 
20 Hz to 20 kHz, +0dB/-3dB
     MLS 506MA 
50 Hz to 15 kHz, +0dB/-1dB;: 20 Hz to 20 kHz, +0dB/-3dB
     MLS 506SA 
20 Hz to 20 kHz, +0dB/-1dB at 30 W into 8 ohms
THD + Noise
     MLS 306, MLS 506 
<0.2% @ 50 Hz to 22 kHz at rated maximum output drive
     MLS 506MA 
<0.8% @ 50 Hz to 22 kHz at rated maximum output drive
     MLS 506SA 
<0.5% @ 1 kHz at 30 W into 8 ohms
S/N 
>90dB at 22 Hz to 22 kHz
Crosstalk 
<-65dB @ 20 Hz to 20 kHz, <-80dB @ 1kHz and below 60 Hz, fully loaded
Stereo channel separation
     MLS 506SA 
>80dB @ 1 kHz
     All other models 
>90dB @ 1 kHz
CMRR 
>90dB @ 20 Hz to 200 Hz, >60dB @ 20 Hz to 20 kHz
Audio input
Number/signal type
     MLS 306, MLS 506 
6 stereo, balanced/unbalanced
     MLS 506MA/SA 
7 stereo, balanced/unbalanced
Connectors
     MLS 306 
Inputs 1 to 3: 3.5 mm captive screw connectors, 5-pole
      
Inputs 4 to 6: 3.5 mm captive screw connectors, 5-pole or female 3.5 mm mini stereo jacks (unbalanced)
     MLS 506 
6: 3.5 mm captive screw connectors, 5-pole
     MLS 506MA/SA 
7: 3.5 mm captive screw connectors, 5-pole
Impedance 
>18 kohms unbalanced/balanced
Maximum level 
+21dBu (balanced or unbalanced) at stated % THD + N
Input gain adjustment 
MLS 306, MLS 506: -15dB to +9dB, adjustable per input
Input level adjustment 
MLS 506MA, MLS 506SA: -78dB to +24dB (in 1 to 100 steps), adjustable
per input
Audio — effects return (MLS 506MA & MLS 506SA)
Number/signal type 
1 stereo, unbalanced
Connectors 
1: 3.5 mm captive screw connector, 3-pole
Impedance 
>10 kohms unbalanced
Level 
+4dBu, unbalanced
Audio — effects send (MLS 506MA & MLS 506SA)
Number/signal type 
1 stereo, unbalanced
Connectors 
1: 3.5 mm captive screw connector, 3-pole
Impedance 
50 ohms, unbalanced
Level 
+4dBu, unbalanced
Audio output — line level (all models)
Number/signal type 
2 stereo/mono (selectable), balanced/unbalanced (1 fixed, 1 variable)
Connectors 
2: 3.5 mm captive screw connectors, 5 pole
Impedance 
50 ohms unbalanced,: 100 ohms balanced
Gain — fixed output
     MLS 306, MLS 506 
     Unbalanced 
0dB
     Balanced 
+6dB
     MLS 506MA, MLS 506SA 
     Unbalanced 
0dB
     Balanced 
+6dB
     Gain — variable output only 
Selectable output level
     MLS 306, MLS 506 
     Unbalanced 
0dB (jumper selectable), or -6dB (jumper selectable, default)
     Balanced 
+6dB (jumper selectable), or 0dB (jumper selectable, default)
     MLS 506MA, MLS 506SA 
     Unbalanced 
0dB (jumper selectable), or -6dB (jumper selectable, default)
     Balanced 
+6dB (jumper selectable), or 0dB (jumper selectable, default)
Gain error 
±0.1dB channel to channel
Maximum level (Hi-Z) 
>+21dBu, balanced at stated %THD+N
Maximum level (600 ohm) 
>+15dBm, balanced at stated %THD+N
Audio output — power amp (MLS 506MA & MLS 506SA)
Number/ signal type
     MLS 506MA 
1 mono
     MLS 506SA 
1 stereo
Connectors 
4 position screw terminal
Sensitivity 
-20dBu (100mV) for 30 watts output
Drive/power (full power out) 
At less than 0.5% THD from 20 Hz to 20 kHz:
     MLS 506MA (70V, mono) 
30 watts (RMS); 4 ohm, 8 ohm, or 70V output taps with common/ground, transformer coupled
     MLS 506MA (100V, mono) 
30 watts (RMS); 4 ohm, 8 ohm, or 100V output taps with common/ground, transformer coupled
     MLS 506SA (stereo) 
60 watts; 30 watts (RMS) per channel, 4 ohm or 8 ohm load
Protection
     MLS 506MA 
Input limiting, thermal, short circuit
     MLS 506SA 
Input limiting (user specifies 4 ohm or 8 ohm load), thermal, short circuit
Indication
     MLS 506MA 
Clip LED indicates the onset of 30 watt power limiting
     MLS 506SA 
Clip LED indicates the onset of 30 watt power limiting on left or right
Control/remote — switcher
Serial control port 
1 RS-232, female 9-pin D connector (shared with contact closure port)
1: 3.5 mm captive screw connector, 5 pole (for control via MLC 206; shared with
IR control port)
Baud rate and protocol 
9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations 
2 = TX, 3 = RX, 5 = GND
Contact closure 
1 female 9-pin D connector (shared with serial control port)
Contact closure pin configuration 
pin 1 = input 1, pin 4 = input 2, pin 5 = ground, pin 6 = input 3,
pin 7 = input 4, pin 8 = input 5, pin 9 = input 6
IR control port 
1: 3.5 mm captive screw connector, 5 pole (shared with the MLC/IR serial control port) for 38 kHz IR signals
Program control 
Extron's control program for Windows®
Extron's Simple Instruction Set™ _ SIS™
General
Power 
100VAC to 240VAC, 50/60 Hz, internal, autoswitchable
     MLS 306, MLS 506 
20 watts
     MLS 506MA 
60 watts
     MLS 506SA 
100 watts
Temperature/humidity 
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount 
Yes, with included brackets
Enclosure type 
Metal
Enclosure dimensions
     MLS 306 
1.75" H x 17.5" W x 9.4" D: (1U high, full rack width)
     4.4 cm H x 
44.4 cm W x: 23.9 cm D
     (Depth excludes connectors and knobs. 
Width excludes rack ears.)
     MLS 506 Series 
3.5" H x 17.5" W x 9.4" D: (2U high, full rack width)
     8.9 cm H x 
44.4 cm W x: 23.9 cm D
     (Depth excludes connectors and knobs. 
Width excludes rack ears.)
Product weight
     MLS 306 
5.5 lbs (2.5 kg)
     MLS 506 
7.0 lbs (3.2 kg)
     MLS 506MA 
10.2 lbs (4.6 kg)
     MLS 506SA 
8.6 lbs (3.9 kg)
Shipping weight
     MLS 306 
9 lbs (4.1 kg)
     MLS 506 
14 lbs (6.4 kg)
     MLS 506MA 
17 lbs (7.7 kg)
     MLS 506 SA 
16 lbs (7.3 kg)
Vibration 
ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings 
UL, CUL
Compliances 
CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF 
30,000 hours
 
EXT-MLS306